|Найти ближайшего торгового представителя.|
Archon D10S Diving Light Bulb: Cree XM-L U2 (Max 860 lumens) Color temperature: 6500k Runtime: 70 min Impact resistance: 1.5M
•1. Separate the light head and body by turning counter-clockwise.
•2. Remove used batteries and replace with fresh batteries as shown by the polarity stickers.
•3. Mount the light head on the body by turning clockwise.
•1. Plug the charger in the wall power socket, the indicator light is green in the free-load status.
•2. Put the battery in the slot of the charger.
•3. The indicator light is red if the battery is not fully charged; it will turn green after fully charged.
•4. Take out the fully charged battery and use them in the diving light.
Push the switch forward to turn the light on.
Push the switch forward again to turn the light off.
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged o-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the o-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please remove the batteries during transportation to prevent it from misoperation.
WARRANTY RETURN POLICY
Please contact your local distributor or retailer for information on how to handle your warranty items.